Home > Log & Timber Parts > RAILING/STAIRS
We found 0 results matching your criteria.

Railings & Stairs

Our log & timber stair and railing line up is unmatched in the market. Not only do we produce railing in wood, we also integrate log and timber railing with FORTRESS FE26 steel railing. Cable railing railing is also available. If you have desire for other combinations of rails and pickets in either logs or timbers, we will be glad to accommodate your request.

Railing

Log Railing (Uniform)

We produce (2) series of log railing in Cedar and Pine: Architectural series & Pro series. We can custom produce almost any size of log rail/picket make up needed. Posts for railing are not part of the system. However, the typical stand alone rail post is a 6" diameter log with a 5" log as the smallest diameter used.

Log Rail - Architectural Series

  • top & bottom rail - 3.75"
  • pickets - 2.5"
  • tenons - 1.5"
  • assembled rail height - 32" & 38" (california compliant)
  • lengths - 2' to 12' section length (in 2' increments)
  • picket spacing - 6" oc
  • picket length - 28" & 34"
  • log rail assembly - can be assembled as a section or loose with rails drilled for job site assembly
  • pre-cut is available for additional fees
    • adds $35 per unique panel
    • adds $20 per panel for end tenoning rails to 2" or 2.5" tenon
    • adds $5 per hole of we are drilling the posts to accept the rail
  • stair rail - always un-assembled and no holes are drilled
  • structural grade - rail "TP SRT1" grade, pickets "appearance" grade
  • code compliant - with stands 200 lb test

Log Rail - Pro Series

  • top & bottom rail - 3.75"
  • pickets - 2" (goes directly into rail)
  • tenons - none
  • assembled rail height - 32" & 38" (california compliant)
  • lengths - 2' to 12' section length (in 2' increments)
  • picket spacing - 5" oc
  • picket length - 28" & 34"
  • log rail assembly - can be assembled as a section or loose with rails drilled for job site assembly
  • pre-cut is available for additional fees
    • adds $35 per unique panel
    • adds $20 per panel for end tenoning rails to 2" or 2.5" tenon
    • adds $5 per hole of we are drilling the posts to accept the rail
  • stair rail - always un-assembled and no holes are drilled
  • structural grade - rail "TP SRT1" grade, pickets "appearance" grade
  • code compliant - with stands 200 lb test

LOG RAIL SPECIES - Incense Cedar (our specialty), Ponderosa Pine (we do not recommend Pine railing for exterior applications)

LOG RAIL SURFACE - hand peeled

Timber Railing

We produce the most unique timber rail in the country. We also can custom produce almost any size of timber rail/picket make up needed. Posts for railing are not part of the system. However, the typical stand alone rail post is a 6x6 timber.

Timber Rail - Architectural Series

  • top & bottom rail - 4"x4"
  • pickets - 2.5"x2.5"
  • tenons - 1.5"
  • assembled rail height - 32" & 38" (california compliant)
  • lengths - 2' to 12' section length (in 2' increments)
  • picket spacing - 6" oc
  • picket length - 28" & 34"
  • ltimber rail assembly - can be assembled as a section or loose with rails drilled for job site assembly
  • pre-cut is available for additional fees
    • adds $35 per unique panel
    • adds $20 per panel for end tenoning rails to 2" or 2.5" tenon
    • adds $5 per hole of we are drilling the posts to accept the rail
  • stair rail - always un-assembled and no holes are drilled
  • structural grade - rail "TP Premium" grade, pickets "appearance" grade
  • code compliant - with stands 200 lb test

TIMBER RAIL SPECIES - Incense Cedar (our specialty), Ponderosa Pine (we do not recommend Pine railing for exterior applications)

TIMBER RAIL SURFACE - hand hewn or rough sawn

Steel Railing with Log or Timber Rail Tops (uniform)

We have integrated the FORTESS FE26 steel railing with our log or timber rail tops to make the most unique look. This style of system is typically an outdoor use and desired for its low to no maintenance. We can custom produce almost any size of log or timber rail/picket make up needed. Posts for railing are not part of the system. However, the typical stand alone rail post is a 6" diameter log or a 6x6 timber or you can use the FORTRESS 2x2 or 3x3 steel posts.

Steel Picket with Log or Timber Top Rail Series

Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Pine or Fir railing for exterior applications)

  • top rail - 3.75" log or 4"x4" timber
  • log/timber to rail joinery
    • the bottom of log/timber is grooved to fit over top rail and then fastened from steel rail underside
    • the log/timber is mounted 4" above the steel rail for "stepped" look
  • rail system - FORTRESS FE26 steel rail
  • colors available - sand black, glass black, hand peened bronze
  • assembled rail height befor log/timber - 32" & 38" (california compliant)
  • lengths - 6' & 8' section
  • steel rail width - 1" (18 gauge)
  • picket width - 5/8" (18 gauge)
  • picket attachment - full weld
  • log rail assembly - can be assembled as a section or loose with rail to be attached at job site
  • pre-cut is NOT available
  • stair rail - 8' length only and is a "rackable" unit
  • rail to post mount - fixture assembly for both guard & stair rail
  • structural grade - rail "TP SRT1 or Premium" grade, pickets "appearance" grade
  • code compliant - with stands 200 lb test

LOG/TIMBER RAIL SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Fir or Pine railing for exterior applications)

LOG/TIMBER RAIL SURFACE - hand peeled or hand hewn

Glass Panel with Log or Timber Top Rail Series

LOG/TIMBER TOP RAIL SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Pine or Fir railing for exterior applications)

  • top rail - 3.75" log or 4"x4" timber
  • log/timber to rail joinery
    • the bottom of log/timber is grooved to fit over top rail and then fastened from steel rail underside
    • the log/timber is mounted 4" above the steel rail for "stepped" look
  • rail system - FORTRESS FE26 steel rail
  • colors available - sand black, glass black, hand peened bronze
  • assembled rail height befor log/timber - 42" (california compliant)
  • lengths - 6' & 8' section
  • steel rail width - 1" (18 gauge)
  • glass panel width - 3/8" thick x 5" (tempered)
  • log rail assembly - can be assembled as a section or loose with rail to be attached at job site
  • pre-cut is NOT available
  • stair rail - 8' length only and is a "rackable" unit
  • rail to post mount - fixture assembly for both guard & stair rail
  • structural grade - rail "TP SRT1 or Premium" grade, pickets "appearance" grade
  • code compliant - with stands 200 lb test

LOG/TIMBER RAIL SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Fir or Pine railing for exterior applications)

LOG/TIMBER RAIL SURFACE - hand peeled or hand hewn

Stairs

Log Stairs (Uniform)

We produce (2) type of log stair systems. The most common is where we have (2) log horses notched to accept the half log treads. The other is where we cut a log in half that will capture the log halves in-between them. The stair system is just parts in gross length. Installing the stair system requires a high level of skill. These stair systems are design to meet code with a maiximum of 7.75" riser height. We have no ability to pre-cut.

LOG STAIRS - UNDER TREAD SERIES - (2) log horses notched for treads

  • LOG HORSE DIAMETER SIZE - 12"
  • LOG HORSE LENGTHS - up to 20'
  • LOG HORSE QUANTITY - 2 logs under the treads
  • LOG TREAD DIAMETER SIZE - 12"
  • LOG TREAD FREQUENCY - 12.5" oc
  • LOG TREAD DEPTH - 3"
  • LOG TREAD LENGTHS - typically 4'
  • LOG STRUCTURAL GRADING - horse "SRT1" grade, tread "appearance" grade

LOG STAIR SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Fir or Pine railing for exterior applications)

LOG STAIR SURFACE - hand peeled or hand hewn

LOG STAIRS - SIDE HORSE SERIES - (1) log horse cut in half to sandwich treads

  • LOG HORSE DIAMETER SIZE - 12"
  • LOG HORSE LENGTHS - up to 20'
  • LOG HORSE QUANTITY - 1 log cut in half
  • LOG TREAD DIAMETER SIZE - 12"
  • LOG TREAD FREQUENCY - 12.5" oc
  • LOG TREAD LENGTHS - typically 4'
  • LOG STRUCTURAL GRADING - horse "SRT1" grade, tread "appearance" grade

LOG STAIR SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Fir or Pine railing for exterior applications)

LOG STAIR SURFACE - hand peeled or hand hewn

Timber Stairs

Our timber stairs systems are perfect for interior and exterior uses. We can custom develop a unique timber system for you by choosing a size of timber that reflects your taste. These systems are designed with a timber in each outer side of the tread. If you have a desire to notch the horse for the tread, it is easily accommodated by increasing the size of the horse to at least 14" tall.

TIMBER STAIRS - SIDE HORSE SERIES

  • TIMBER HORSE SIZE - 6"x12" or 6"x14"
  • TIMBER HORSE LENGTHS - up to 20'
  • TIMBER HORSE QUANTITY - 2 timbers
  • TIMBER TREAD SIZE - 4"x10" or 4"x12"
  • TIMBER TREAD FREQUENCY - 12.5" oc
  • TIMBER TREAD LENGTHS - typically 4'
  • TIMBER STRUCTURAL GRADING - horse "TP Premium" grade, tread "appearance" grade

TIMBER STAIR SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine (we do not recommend Fir or Pine railing for exterior applications)

TIMBER STAIR SURFACE - hand peeled or hand hewn


Timber Products Tech Guide
Timber Products Tech Guide - all logs are structurally graded using Timber Products grading standards