SIDING

Sierra Log & Timber Red Ced Siding

We produce the most complete line of log and timber siding in the country at Sierra Log & Timber. Our siding can be used for both residential and commercial applications. Our timbers are known for the hand hewn & hand peel finishes, natural & uniform profiles, long length capability, and the complete line produced in cedar. Our siding can be used on the interior and/or exterior of a log or timber home either as full wall siding or as partial walls—i.e. "wainscoting," either vertical or horizontal.

Corners for our log siding are typically made from vertical logs or timbers with a dado cut taken out of the side so it fits onto the exterior edge of a framed wall. You can also use two boards. We also can produce false tails for certain sidings to achieve the appearance you want for your Oregon log home package.

Uniform Log Siding

We produce the largest choice of uniform siding in the country, especially when it comes to cedar. All of our uniform log sidings match wall log profiles. Minimum run varies from 800 to 1500 linear feet depending on size of profile for a NO CHARGE setup fee. If minimum is not met, then a setup fee of between $250 to $400 could apply depending on profile.

Uniform Log Siding Profile, Size & Species

  • 2x8 light radius; cedar, white fir, Ponderosa pine (matches 6x8 D log)

  • 3x10 medium radius, cedar (matches 7x10, 8x10, 10x10 D log)

  • 3x8, 3x9, 4x10, 5x12, 6x13 full radius, cedar (matches round Swedish cope or T&G log)

  • 1/2 log siding can be produced from round Swedish cope or T&G logs - 8", 9", 10", 12", 13" (cedar)

UNIFORM LOG SIDING SURFACE - Hand peeled (standard except for 2x8), Smooth (standard for 2x8)

UNIFORM LOG SIDING JOINERY - Ship lap T&G

UNIFORM LOG SIDING FALSE TAILS ABILITY

  • 2x8 Light radius (dovetail)

  • 3x10 Medium radius (dovetail)

  • 3x8, 3x9, 4x10, 5x12, 6x13 Full radius (saddle notch)

UNIFORM LOG SIDING LENGTHS - Up to 20'

UNIFORM LOG SIDING GRADE - Appearance grade

Natural Log Siding

We produce natural log siding in a variety of sizes. Natural log siding is always custom quoted and produced based on individual project requirements. No minimum is required.

NATURAL LOG SIDING SPECIES - Incense Cedar (our specialty), Douglas Fir, Ponderosa Pine

NATURAL LOG SIDING PROFILE & SIZE - 8" to 18" tip log all natural log sizes can either be cut flat/flat at a uniform stacking height or left at their natural taper.

NATURAL LOG SIDING SURFACE - Hand peeled or the bark left on

NATURAL LOG SIDING LENGTHS - Up to 20' (standard) with the ability to make longer up to 32' (limited to certain sizes and profiles)

NATURAL LOG SIDING GRADE - Appearance grade

Timber Siding

Sierra Log & Timber produces a full spectrum of unique timber and natural edge siding profiles. Certain siding will match timber wall log profiles.

TIMBER SIDING SQUARE EDGE, SIZE & SPECIES - No minimum

  • 1x3, 1x4, 1x6, 1x8, 1x10, 1x12 Timber - Board & batten, lap siding, edge to edge siding (vertical or horizontal) (cedar, Douglas fir, white fir, Ponderosa pine)

  • 1x3, 5/4x3 Specialty batten (for board & batten profile) - Standard square edge or craftsman edge profile with back surface grooved with a channel for ultimate fit

TIMBER SIDING SHIPLAP T&G, SIZE & SPECIES - Minimum run is 1500 linear feet for a NO CHARGE setup fee. If minimum is not met, then a setup fee from $250 could apply.

  • 1x3, 1x4, 1x6, 1x8, 1x10 Timber - Edge to edge siding, vertical or horizontal (cedar, Douglas fir, white fir Ponderosa pine).

  • 5/4x8, 2x8 timber - channel, V groove (cedar, white fir, ponderosa pine). Matches 4x8 & 6x8 Timber log.

  • 5/4x10, 2x10 - Channel, V groove (cedar). Matches 7x10, 8x10, 10x10 Timber log.

TIMBER SIDING NATURAL EDGE, SIZE & SPECIES - No minimum

  • 1x8 to 1x18 timber - Square back lap siding, natural both sides, vertical or horizontal (cedar, Douglas fir, white fir, Ponderosa pine)

TIMBER SIDING SURFACE - Rough sawn (standard), hand hewn, smooth (limited to certain sizes and types)

TIMBER SIDING LENGTHS - Up to 20'

TIMBER SIDING GRADE - Appearance grade

Profiled Siding (Standard Market)

We produce the most complete line of standard profiled siding you will find anywhere on the market. These products are made from board stock and are typically net thicknesses. Minimum run is 1500 linear feet for a NO CHARGE setup fee. If minimum is not met, then a setup fee from $250 could apply.

PROFILE SIDING SPECIES - Incense cedar, western red cedar, Douglas fir, white fir, Ponderosa pine

PROFILED SIDING

  • 1x4, 1x6, 1x8, 1x10 - V groove, square edge, channel, cove

  • 2x4, 2x6, 2x8, 2x10 - V groove, square edge, channel, cove

  • 1x8 rabited bevel - Rough sawn or hewn

PROFILED SIDING SURFACE - Smooth, rough sawn, reversible, hand hewn

PROFILED SIDING JOINERY - Shiplap and/or T&G

PROFILED SIDING LENGTHS - Up to 20'

PROFILED SIDING GRADE - Appearance, STK (select tight knot)

Call Sierra Log & Timber, the largest producer of red cedar profiled products in the nation.